RailTEC Publications

Input key words to start publication search


Key Words in Title/Authors/
Publication/Publisher/Status:

      
Search Condition(s):

All Publications

Lautala, P. and C.T. Dick. 2017. Railway Engineering Education Symposium: Evolving to rebuild a growing rail academic community. Accepted, Transportation Research Record: Journal of the Transportation Research Board.

Pengelly, S. and C.T. Dick. 2017. Economics and planning of short haul and short line railway intermodal rail service: Lessons from past and current operations. Accepted, Transportation Research Record: Journal of the Transportation Research Board.

Zhu, K., Y. Qian, J.R. Edwards and B.O. Andrawes. 2017. Finite element analysis of rail end bolt-hole and fillet stress on bolted rail joints. Transportation Research Record: Journal of the Transportation Research Board. 2607: 33-42.

Sehgal, L., A. Garg, V. Sehgal and W. Buttlar. 2017. Hot Mix Asphalt in Ballasted Railway Track: International Experience and Inferences. Institution of Permanent Way Engineers International Technical Seminar, Mumbai, India, January 2017.

Van Dyk, B.J., J.R. Edwards, M.S. Dersch, C.J. Ruppert Jr. and C.P.L. Barkan. 2017. Evaluation of dynamic and impact wheel load factors and their application in design processes. Journal of Rail and Rapid Transit. 231 (1): 33-43, DOI:10.1177/0954409715619454.

Liu, X., M.R. Saat and C.P.L. Barkan. 2017. Freight-train derailment rates for railroad safety and risk analysis. Accident Analysis and Prevention. 98 (2017): 1-7.

Alemazkoor, N., H. Meidani and C. Ruppert Jr. 2017. Survival analysis at multiple scales for track geometry deterioration modeling. Accepted, Journal of Rail & Rapid Transit.

Gao, Z., H.E. Wolf, M.S. Dersch, Y. Qian and J.R. Edwards. 2016. Field Measurements and Proposed Analysis of Concrete Crosstie Bending Moments. In: Proceedings of the American Railway Engineering and Maintenance-of-Way Association Annual Conference, Orlando, FL, August 2016.

Dick, C.T., L. Sehgal, C.J. Ruppert Jr. and S. Gujaran. 2016. Superelevation Optimization for Mixed Freight and Higher-Speed Passenger Trains. In: Proceedings of the American Railway Engineering and Maintenance-of-Way Association Annual Conference, Orlando, FL, August 2016.

Holder, D.E., Y. Qian, M.V. Csenge, J.R. Edwards, M.S. Dersch and B.J. Van Dyk. 2016. Comparison of Lateral Load Performance of Concrete Crosstie Heavy Haul Fastening Systems. In: Proceedings of the American Railway Engineering and Maintenance-of-Way Association Annual Conference, Orlando, FL, August 2016.

Bastos, J.C., M.S. Dersch, J.R. Edwards and B.O. Andrawes. 2016. Determination of the Influences of Deteriorated Track Conditions on Gauge Widening in Concrete Sleeper Track. In: Proceedings of the 11th World Congress on Railway Research, Milan, Italy, June 2016.

Csenge, M.V., Y. Qian, M.S. Dersch and J.R. Edwards. 2016. Resilient Concrete Crosstie and Fastening System Designs for Light Rail, Heavy Rail, and Commuter Rail Transit Infrastructure. In: Proceedings of the 11th World Congress on Railway Research, Milan, Italy, June 2016.

Ghosh, A., M.J. Greve, M.S. Dersch, J.R. Edwards and C.P.L. Barkan. 2016. Analyzing Rail Seat Load Distributions on Concrete Sleepers using Matrix Based Tactile Surface Sensors. In: Proceedings of the 11th World Congress on Railway Research, Milan, Italy, June 2016.

Lin, X., J.R. Edwards, M.S. Dersch and C.J. Ruppert Jr. 2016. Load Quantification for Light Rail, Heavy Rail, and Commuter Rail Transit Infrastructure. In: Proceedings of the 11th World Congress on Railway Research, Milan, Italy, June 2016.

Wolf, H.E., J.R. Edwards, M.S. Dersch, Y. Qian and D.A. Lange. 2016. Field Measurement of Bending Moments in Prestressed Concrete Monoblock Sleepers. In: Proceedings of the 11th World Congress on Railway Research, Milan, Italy, June 2016.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Next Page     Total: 360 results.

Print Search Results

Number of visits: